It is time to unlock the full potential of your note 3 now don’t you think? Well, if you are ready to get a rooted note 3 sm-n9005, then all you need to do is simply follow the below steps and fully unlock your note 9005 model. Make sure that you don’t use this tutorial on other models otherwise, you may brick them! So, let’s get started with how this note 3 sm-n9005 root works!
Getting Things Ready
Before you go about rooting the device, it is important to make sure that you have things ready for the whole process. First of all, you should begin by setting up your tablet.
Ensure that you have bumped up your power to about 60% so as to avoid your device shutting down on you during the procedure.
Make sure that you create an external backup for all of your content should the rooting fail and you lose all your data.
Ensure that you have the native USB device ready or a similar working cable
Now move over to your computer and make sure that you do the below.
Download all these root files and then extract them on your computer.
Download the necessary drivers from here and install the on you computer.
Starting The Rooting Process
Now that you have all that is needed ready, the next thing is to make sure that you keenly follow all these steps as neatly as they are outlined. Remember that they are sequential which means that you can neither substitute them nor skip!
Power off your note 3 completely by holding onto the power button for about 8-10 seconds.
Now you have to reboot into the download mode. To do so, simply hold these three buttons together: power button, home button and volume down. You will then be presented with a warning which has two options – proceeding by pressing the volume up button or aborting the operation by pressing the volume down button.
Whilst in the download mode, you now have to connect to your computer using the USB data cable and launch Odin. You should then see that your device has been added, thanks to a notification on Odin.
Now that you are detected by Odin, press PDA button and then move over to the folder where you extracted the files during setting up your computer step. Select CF-Auto-Root.tar.md5 file.
Now you have to check F.Reset on Odin interface if it has not been checked yet and then leave everything else as it is.
Click on the start button and simply wait for the process to complete.
Assuming all went well, you should see a green Pass notification and that is it. You are now ready to unleash the full capabilities of your note 3.
With that, all you need to do is simply try out the endless list of custom applications and fully understand the questions that many people ask when they want to root Galaxy Note 3!
The title sells it all, this is a computer independent tutorial for your note 3. It is very easy and straightforward. With that, have your note 3 ready and let’s get. Please make sure that you use this tutorial on the n900 model alone as this will brick other models if tried out on them.
This is the first step to getting you a rooted note 3 without computer is making sure that you have everything that is required set. These include the likes of:
Having enough power, about 70% and above.
A reliable internet connection, preferably Wi-Fi
Permit installation from unknown sources. If you don’t know how to do this, then you have a mini-section immediately below to aid you.
Make sure that you have backed up all the content to preferably an external storage, should the process fail and all the data gets lost.
Trusting Unknown Sources.
By default, androids are not allowed to install applications from third party suppliers other than the android market. Now this is why you have to make sure that you allow this option if you are to go on with rooting the note 3 without computer.
Begin by going to settings interface, as is the first step on how this Galaxy Note 3 root works.
Now tap on the security option.
On the new interfaced, scroll down and under device administration, you will see the unknown sources option, simply check this and that is it.
This is where you actually get to set up your tablet ready.
Install the downloaded file and then launch it by simply tapping on it as you would any other application.
Now that you have everything set, this is the final step. All you need to do is basically:
You now have to launch the application and begin the rooting process. You can do this by simply clicking on the One Click Root option on the interface.
You should then wait for the process to compete without interrupting it. After that, you will have your rooted device up and running awaiting you to install all the custom ROMs and applications which you wish to experiment with.
That is it, all you need to do now is simply enjoy custom ROMs and applications on your phone answering the question on why root note 3.
Say you have just acquired that fancy note 3 N900 of yours. How about you get to enjoy the full capabilities by unlocking it using the simple guidelines outlined below? If you are ready, let’s get started. Make sure that you only use this tutorial for rooting the note 3 verizon 5.0 you have on the specified model.
Setting Things Ready
Before scrolling to other parts of the tutorial, make sure that you set all the requirements ready. This means that you have to set both your tablet and your compute ready for everything.
For you to have your note 3 ready, make sure that you have met the below requirements.
Be sure that you have over 60% battery charge to guarantee you a successful and complete rooting.
Back up all your device contents to an external storage suppose the process go haywire before you start rooting the note 3 verizon 5.0.
Have the native USB data cable ready, or a working alternative
Ensure that you have USB debugging mode enabled, as this is an important section of how this note 3 verizon 5.0 root works. If not, then you can do so by following the below steps.
Enabling Debugging Mode.
Navigate to the settings page on your device.
Now find the about tablet label and then tap this.
On the new interface, simply scroll over to the bottom until you see the build number option and tap this 5 times, till you get the notification that you are now a developer. That is it
Start by downloading these files which will be used for the process.
For the above CF-Auto-Root file, make sure that you extract it onto the desktop, so as to have it ready for usage.
Steps To Follow
Start by powering off completely so as to be able to activate the download mode option
Now to be able to activate the download mode, simply hold onto the power, volume down and home button together for a few seconds. You will get a warning notification with an android logo.
Now, establish a connection using the USB cable and the launch Odin. You should see a notification that your note has been added. If you don’t see this notification, then you have to ensure that you have installed the Samsung Kies drivers above.
Now, assuming you were detected by Odin, you should now click on the PA button and move over to the CF-Auto-Root file which was extracted when you were setting up your computer ready. After you select it, click Start to begin the whole process.
If completed successfully, you should see a green notification that says Pass. That is it, you now did in fact root Note 3!’
Now, you simply need to unplug your device, put it in recovery mode and then access the recovery mode interface to install the SuperSU zip to be able to have super user access on your tablet. You can now start understanding why root note 3 verizon 5.0 is that important!
Are you looking for the easiest way to unleash the full capability of your newly acquired Samsung galaxy note 3? Well, if you are then this is the ultimate guide for rooting your note 3. Without further ado, let’s get started and see how this note 3 root works!
Please make sure that you have installed the required USB drivers before proceeding with rooting Note 3. Make sure that you have enabled USB debugging mode. If you haven’t, then you might do so by:
Navigating to settings tab.
Tap about phone and on the new interface, you have to scroll to the bottom.
You then have to tap on build number 7 times.
After the above step, you should get a notification that you are now a developer.
The next thing is to go back to the developer option and then simply check USB debugging and that is it!
Make sure to backup all the important files to a separate external memory in case the process of trying to get a rooted note 3 fails and you lose all your content.
Finally ensure that you have charged to over 60%. With all these in place, then you are not ready to start and understand the benefits of why to root.
To get started right away, get the needed tools here: Rooting Tools
Before proceeding, remember that this operation:
Will most definitely void your warranty
May potentially get you bricked.
Now that you have known all that is deemed of you, you may now proceed with the process. Follow the bellow steps in a sentential manner, otherwise, this will now work!
Extract the downloaded root package above to get a file with the .tar.md5
Power off completely by holding down the power button for up to 7 seconds.
Now enter into the download mode by holding down the home + power + volume down buttons simultaneously. NB: You may be asked to press a button to proceed with the operation – simply press the indicated button to continue.
Now launch the Odin application that you downloaded on your PC.
Whilst in download mode, connect your now ready phone to your computer using the appropriate USB cable. Odin will then indicate that it has detected the connection by turning one of its COM boxes blue.
The next thing is to click on the AP button then navigate to the folder where you extracted the file in the first step.
Make sure that Auto-reboot and F.Reset Time options are not selected, as well as confirm that the Repartition button is not selected as well. After that, you have to hit the Start button to begin the process.
Once the process completes, a reboot process will follow and that is it! If the process is not successful, then that means that you have not followed the steps as they are!
So again, make sure that you get the needed tools first before starting. Get them here: Rooting Tools
Are you looking for the easiest way to unlock the full potential of your newly acquired AT & T tablet? Well, if you are then this is the site for you. So, without further ado, you might as well get that old n900a of yours and get started on the tutorial as well. The steps for rooting the note 3 at&t have been categorized into 3 main steps which should be followed as outlined.
The first thing is to make sure that you have everything up and running before you actually delve deeper into how to root Note 3.
To be sure that you have your note 3 ready, you have to follow the below steps as they are outlined.
First make sure that you have enough power on your device, preferably 70% and above.
The next thing is to ensure that you have the right amount of internal storage.
Finally make sure that you have USB debugging mode enabled as shown below.
Enabling USB Debugging Mode
Open the settings menu on your device.
Now you have to tap on the about Phone label.
The next thing is to make sure that you tap the Build Number label 5 times until you get the notification that you are now a developer.
That is it, now go to the Developer Option tab and enable USB debugging mode.
Setting Your Computer Ready
This basically means that you have to make sure that you take care of a number of downloads. These are:
Now you have to extract the above downloaded files to a folder of your choice on your computer. Make this easy to remember as it will come in handy when you are using Odin
Starting The Process
Power off your smartphone completely.
Reboot your device in download mode by simply pressing the Home, Power and Volume Down buttons at the same time. You will get a warning prompt which gives you the option of aborting the operation or proceeding. Simply proceed, to go ahead, or you may cancel if you wish to change anything.
Now launch Odin and then plug in using the USB cable.
Now, this is the final section, picking up where the previous one left.
You will see an added notification on Odin.
Click on the PDA button and then navigate to the folder where you extracted the downloaded files then pick the file named Root_de_la_Vega.tar.
Now make sure that F.Reset and Auto Reboot are the only checked option on Odin interface. Now click Start and wait for the process to complete.
When the process completes, you will see a green notification indicating Pass. That is it, you now have a rooted note 3 at&t!
This tutorial has basically answered you the dying question – why root note 3 at&t! happy rooting!
Are you ready to claim super user access on your device? Well, if you are then this is the place to get started. The below tutorial is for the model # 900 and should therefore not be tried on other devices. If you are set then let’s get started and get you a rooted note 3 5.0 in a jiffy!
Getting Your Device End Ready
First things first, make sure that you have enabled USB debugging on your device before proceeding with the rest of the process on rooting the note 3 5.0. If you haven’t then you can do so under the Developer option. If you don’t have a developer interface, you can activate it by simply:
Opening About phone.
Scroll down and find the Build Number label, you have to tap this 5 times till you get the notification that you are now a developer.
The next thing is to back to the Setting main interface and then scrolling all the way down to locate the Developer Label and tapping it.
You will now see the option of checking and enabling USB Debugging mode.
Ensure that you have enough power, at least 60% is recommended for a complete Note 3 root.
Make sure that you have the native USB data cable as well as installing the required USB drivers – if you already have preinstalled drivers, you should update them.
Copy The Super User Installer To Your Internal Memory
This is the file which will be installed when the phone undergoes the rooting process. Download SuperSU file from market or a third party provider as this is an important file when it comes to how this note 3 5.0 root works.
Start Download Mode And Then Hooking Onto Odin
To be able to set up the download mode option, you have to:
Power off completely by holding onto the power button for about 10 seconds.
Now hold power key, home key and the volume key till you see a warning. Now move over to Odin on your PC
Moving Onto Odin
Simply connect to your computer using the USB device and you will see a notification on Odin that your device has been added.
If detected, move over to the flashing section, otherwise, ensure that you have installed the necessary drivers.
Flashing The CWM Recovery.
Now all that you need is:
Click on AP and navigate to the Clock Work file for your model number.
After that, you now have to check F.Reset in options, while all the other options have been unchecked. Now click Start and wait for the process to complete.
If you get the Pass notification, then that means that all went well, otherwise, there was a problem which means that you have to follow the above steps once again.
You may now reboot and that is it, you can enjoy all your custom applications!
Now that is it. You can now enjoy using the custom ROMs and get to fully understand the question why root note 3 5.0 – endless limits and possibilities.